Peel and stick removable floor decals! Made of quality 8 mil thick vinyl for durability. Easy to install, care for, and remove. Indoor use on hard flooring only.
Application Directions: Please read fully before installing. NOT FOR USE ON CARPETS.
1. Pre-Installation: Floor decals must be applied to a smooth flat surface that is clean and completely dry using a lint-free cloth. Ensure surface and air temperature are above 10°C.
2. Installation: When applying decal, it may be beneficial to use masking tape to tape the top edge of the decal to your surface. This will help you straighten it and hold it in place while flattening out the decal on the desired surface. Peel back 2” of backing material from the top edge to reveal adhesive backing. Now stick decal to surface applying pressure in a full horizontal sweeping motion with a squeegee (or palm of hand) slowly moving down a few inches at a time removing the backing as you go until finished. For maximum smoothness, ensure there are no air pockets. Applying pressure is necessary to activate the adhesive, especially around the edges, to ensure it is fully sealed.
3. Care and Maintenance: It is recommended to only wash the decals with soap and water. Avoid using harsh chemicals or bristle brushes while cleaning.
4. Durability: The longevity of the floor decals will vary greatly based on proper installation, foot traffic, and maintenance. A typical low traffic area will last 3-6 months before requiring a replacement. Very heavy traffic, improper installation, or incorrect cleaning could lead to adhesive failing much earlier. When removing decals beyond 6 months, decal adhesive residue may be tougher to remove from applied surface. We do not offer any product guarantees beyond initial print quality and workmanship.
Carpet Decal
Peel and stick removable carpet decals! Made of quality 6 mil fabric with removable high tack adhesive. Water and slip resistant carpet decals are easy to install, care for, and remove. Indoor use only on virtually any flooring surface including carpet, tile, ceramic, smooth concrete, marble, vinyl and wood.
Application Directions: Please read fully before installing. RECOMMENDED FOR LOW PILE CARPETS ONLY
1. Pre-Installation: Carpet decals must be applied to a low pile carpet or flat surface that is clean of debris using a vacuum and completely dry. Ensure surface and air temperature are above 10 oC.
2. Installation: When applying decal, it may be beneficial to use masking tape to tape the top edge of the decal to your surface. This will help you straighten it and hold it in place while flattening out the decal on the desired surface. Peel back 2” of backing material from the top edge to reveal adhesive backing. Now stick decal to surface applying pressure in a full horizontal sweeping motion with a squeegee (or palm of hand) slowly moving down a few inches at a time removing the backing as you go until finished. For maximum smoothness, ensure there are no air pockets. Applying pressure is necessary to activate the adhesive, especially around the edges, to ensure it is fully sealed.
3. Care and Maintenance: It is recommended to only wash the decals with soap and water. Avoid using harsh chemicals or bristle brushes while cleaning.
4. Durability: The longevity of the floor decals will vary greatly based on proper installation, foot traffic, and maintenance. A typical low traffic area will last 3-6 months before requiring a replacement. Very heavy traffic, improper installation, or incorrect cleaning could lead to adhesive failing much earlier. When removing decals beyond 6 months, decal adhesive residue may be tougher to remove from applied surface. We do not offer any product guarantees beyond initial print quality and workmanship.